This standard operating procedure sets out how to prepare an Apple iPhone before it is forensically copied (imaged). Completing these steps before the device is handed over allows the copy to be taken without delay, and with as little change to the data on the device as possible.
Before you start
- Confirm you have authority to have the device copied, for example the consent of the person who uses it, the organisation’s authority over a company-owned device, or a court order.
- Have the person who normally uses the iPhone present. Steps 1 to 3 need their passcode and their face or fingerprint.
- Do not delete anything, reset the iPhone or install an iOS update.
- Use the iPhone as little as possible, as every use changes the data it holds.
- Complete the steps in the order shown.
Procedure
- Obtain PINs and passcodes. Record the iPhone’s passcode and check that it unlocks the device. Where they are in use, also record the SIM PIN, the Screen Time passcode, the password for encrypted computer backups, and the passcodes for any apps that are locked separately. If iCloud data is also to be copied, record the Apple Account email address and password.
- Turn off Stolen Device Protection. Go to Settings > Face ID & Passcode (Touch ID & Passcode on some models) > Stolen Device Protection and turn it off. Away from a familiar location such as home or work (or everywhere, if the user has chosen that setting), the iPhone only allows this with the user’s Face ID or Touch ID followed by a one-hour security delay. Do this step while the device is still with its user, ideally at home or work.
- Remove Face ID or Touch ID. Once Stolen Device Protection is off, go to Settings > Face ID & Passcode and choose Reset Face ID, or delete each stored fingerprint under Touch ID & Passcode. Lock the iPhone and check that it now unlocks with the passcode alone.
- Stop the screen locking. Go to Settings > Display & Brightness > Auto-Lock and choose Never. If Never is not offered, turn off Low Power Mode in Settings > Battery and try again. An iPhone managed by an organisation may not allow this.
- Turn off Erase Data. At the bottom of Settings > Face ID & Passcode, turn off Erase Data so the iPhone cannot wipe itself after repeated incorrect passcode attempts.
- Allow cable connections. On iOS 26 or later, go to Settings > Privacy & Security > Wired Accessories and choose Always Allow. On earlier versions, go to Settings > Face ID & Passcode and turn on Accessories under Allow Access When Locked.
- Isolate the iPhone from networks. Turn on Airplane Mode, then check in Settings that Wi-Fi and Bluetooth are both switched off. This stops the device being locked or erased remotely, and stops new data arriving.
- Record the device details. From Settings > General > About, note the model name, model number, serial number, IMEI and iOS version. Also note the date and time shown on the iPhone alongside the actual date and time, and any visible damage.
- Keep the iPhone switched on and charged. Do not restart it or turn it off. Charge it fully and include its charging cable.
- Document and hand over. Record who carried out each step and when. Hand over the iPhone, its cable, the device details and the PINs and passcodes, keeping the passcodes separate from the device. Record the date, time and people involved in the handover.
After the copy is complete
When the iPhone is returned, turn Stolen Device Protection back on, set up Face ID or Touch ID again, restore the Auto-Lock, Erase Data and accessory settings, and turn off Airplane Mode. Change any passcode or password that was shared for the copy.
Need help?
Menu names are based on recent versions of iOS and may differ slightly on your device. If a step cannot be completed, or the passcode is not known, stop and contact us at support@incidentresponse.co.nz before going any further.
